Want to get more out of your CO2 tank? In this article I will tell you three ways that can help you get the most out of your tank in terms of performance and life.
If your paintball tank has a normal pin valve, you are missing out on the convenience of having an on/off valve. With an on/off valve on your paintball tank you can screw in your tank, turn on the valve to gas your gun up, and then when you're done, simply turn it off.
Pin valves shorten the life of your o-rings. When you unscrew a tank with a pin valve, the left over gas in the gun will often blow out, making an unpleasant hissing sound. This will sometimes ruin your o-ring. An on/off valve makes it more painless to remove your tank. Simply turn off the valve, shoot out the remaining gas, and unscrew it. It will save your o-rings, and it will get rid of the annoying hiss.
Anti-siphon kits do wonders for CO2. The problem with CO2 is that when it is inside your paintball tank, part of it is a liquid, and another part of it is a gas. When it comes to shooting a paintball gun, gas is good.
CO2 exists as a liquid and a gas in your tank, and when your gun starts running off of the liquid, its performance will suffer. An anti-siphon kit will help make sure that the gas goes into the gun and not the liquid.
With all the above improvements added to your tank, you can keep it looking nice and in good condition by adding a neoprene cover. This will keep it safe from normal wear and tear and even help it grip in to your shoulder better when you are shooting.
An on/off valve is an o-ring saver, and is convenient to have. You can easily turn your tank on and off when needed. It makes life easier.
An anti-siphon kit will help fuel your gun with gas, and not liquid. This will help your gun perform with better consistency.
To protect and keep it looking brand new, a neoprene cover will keep your tank from getting scratches and dings from normal use.
If your paintball tank has a normal pin valve, you are missing out on the convenience of having an on/off valve. With an on/off valve on your paintball tank you can screw in your tank, turn on the valve to gas your gun up, and then when you're done, simply turn it off.
Pin valves shorten the life of your o-rings. When you unscrew a tank with a pin valve, the left over gas in the gun will often blow out, making an unpleasant hissing sound. This will sometimes ruin your o-ring. An on/off valve makes it more painless to remove your tank. Simply turn off the valve, shoot out the remaining gas, and unscrew it. It will save your o-rings, and it will get rid of the annoying hiss.
Anti-siphon kits do wonders for CO2. The problem with CO2 is that when it is inside your paintball tank, part of it is a liquid, and another part of it is a gas. When it comes to shooting a paintball gun, gas is good.
CO2 exists as a liquid and a gas in your tank, and when your gun starts running off of the liquid, its performance will suffer. An anti-siphon kit will help make sure that the gas goes into the gun and not the liquid.
With all the above improvements added to your tank, you can keep it looking nice and in good condition by adding a neoprene cover. This will keep it safe from normal wear and tear and even help it grip in to your shoulder better when you are shooting.
An on/off valve is an o-ring saver, and is convenient to have. You can easily turn your tank on and off when needed. It makes life easier.
An anti-siphon kit will help fuel your gun with gas, and not liquid. This will help your gun perform with better consistency.
To protect and keep it looking brand new, a neoprene cover will keep your tank from getting scratches and dings from normal use.
About the Author:
Looking for a tippmann paintball gun very cheap or other gun for a low price? Check out the paintball guns very cheap web site.
0 comments:
Post a Comment